A burst supply line, an overflowing tub, or a storm surge under the back door doesn't wait for business hours, and neither do we. We dispatch Myra units carrying industrial extraction pumps, air movers, and commercial dehumidifiers already loaded on the truck.
Hirex Water Damage started because homeowners in Myra, TX kept telling us the same story: a national hotline picked up, put them on hold, and then subcontracted the job out to whoever was cheapest and closest. Every technician on our Myra roster is a Hirex Water Damage employee, not a gig-app contractor pulled from a random directory.
Our crew leads carry IICRC water restoration certifications and have logged real hours on Category 1, 2, and 3 losses, so Ceiling Water Damage Repair in Myra isn't a side service we tacked on — it's the reason the company exists. We carry full general liability coverage and are licensed to operate throughout Myra, TX, so you're protected from the moment our truck pulls into the driveway.
We keep a stocked warehouse inside Myra, TX so equipment never has to be trucked in from another region, which is the difference between a 45-minute arrival and a next-day one.
Ask any Myra property manager who has dealt with a burst supply line at 3am — the difference between a crew that shows up ready and one still loading a truck at the shop is measured in gallons of water soaking into your subfloor. That's the gap Hirex Water Damage was built to close, one Myra call at a time.
Not every leak announces itself with a flooded floor. A lot of the worst damage we see in Myra started small and got ignored for weeks. Here's what tells us a property needs professional attention rather than a mop and a fan:
Recognizing one of these signs early is the difference between a contained repair and a gutted room, so call our Myra team and get a straight answer on how urgent it is.
We size the Myra response to the actual damage — a single-room extraction gets a two-person crew, a commercial loss gets the full fleet — nothing gets a cookie-cutter response.
Our Myra units run truck-mount extraction pumps that pull thousands of gallons per hour, cutting standing-water time from days to hours. Every extraction job includes moisture mapping so we know exactly which materials are still holding water once the visible flooding is gone.
Once water is out, we bring in commercial air movers and LGR dehumidifiers, positioned using psychrometric readings rather than guesswork, with daily drying logs so you can see the numbers improving, not just take our word for it.
For Myra homeowners, that means drywall removal at the flood cut line, subfloor assessment, and content pack-out for anything that can be saved, with clear photo documentation at every stage for your insurance claim.
Myra businesses and property managers get a dedicated project lead, after-hours crews, and equipment scaled to square footage rather than a single-crew response — we know a flooded lobby or a leaking unit above tenants below has to move fast.
When a Myra job involves sewage backup, our team suits up in full PPE, applies EPA-registered antimicrobials, and safely disposes of porous materials that can't be saved.
Every Myra job includes a preventive antimicrobial application, and if we spot conditions that need full remediation we tell you plainly instead of quietly hoping it clears up.
You get a written estimate before any equipment runs, not a mystery total handed to you after the fact.
Local staging inside Myra, TX means Myra response times usually beat the national average by a wide margin.
We document everything with photos and moisture logs and work directly with your adjuster so you're not stuck translating restoration jargon.
Final moisture readings have to hit dry-standard before we consider a Myra job done, and getting there again is on us, not you.
A short call with our Myra dispatcher tells us whether this is a one-room job or a multi-crew response before anyone drives out.
A licensed technician heads to your Myra address with extraction and drying equipment already loaded.
Extraction happens immediately, followed by a moisture survey that tells us precisely where the drying equipment needs to go.
We re-check moisture levels daily until materials hit dry standard, then hand you full documentation for your records or your insurer.
Our Myra technicians use moisture meters at the start and the end of every job, and the final number has to hit the dry standard before we leave. If a callback shows lingering moisture within 30 days of a completed job, we return and correct it at no additional charge.
You'll find that exact commitment printed on your Myra paperwork, not just mentioned over the phone. We try to send the original technician back for any follow-up so you're not re-explaining the job to someone new.
"We had standing water from a burst water heater and the technician showed up before I even finished mopping the entry way." — Danielle R.
"They dealt with my insurance adjuster directly and I didn't have to translate a single restoration term myself." — Marcus T.
"The drying logs they left behind actually made sense — I could see the numbers dropping every day until it was done." — Priya S.
"Our restaurant flooded from a line break in the kitchen and they had us back open in three days flat." — Aaron W.
"They handled a blackwater situation in our basement without making me feel like it was a bigger disaster than it was." — Lena G.
"The quote matched the final invoice exactly. No surprise charges tacked on at the end." — Sam O.
Because our equipment is staged inside Myra, TX, most Myra calls see a technician on-site within 60 to 90 minutes of the initial call.
Upfront, written pricing is standard on every Myra job, not an add-on option.
Our Myra on-call rotation covers water extraction, drying, and blackwater cleanup any hour of the day or night.
Yes, we document everything with photos and moisture readings and can communicate directly with your adjuster.
We take moisture meter readings on affected materials and compare them against the dry standard for that material type — a visual check alone isn't enough.
Yes, our Myra crews are trained and equipped for Category 3 blackwater response, including PPE and antimicrobial treatment.
If it's safe, shut off the water source, move electronics and valuables away from the affected area, and avoid the space if standing water is near outlets.
We scale crews and equipment for commercial Myra accounts and assign a dedicated project lead for anything beyond a single unit.
Drying time varies with material and how quickly extraction started, but 3 to 5 days is typical for most Myra jobs.
Not if it's addressed quickly — mold generally needs 24-48 hours of sustained moisture, which is exactly why fast extraction matters.
We stand behind every Myra job with a documented dry-standard guarantee and a 30-day callback policy.
See the zip codes and nearby cities listed below — our Myra crews cover that full radius.
Myra is our home base, and our reach extends across Myra, TX through a network of staged equipment and on-call technicians. If your address falls inside or near Myra, a Hirex Water Damage crew can typically respond the same day.
— Embedded service-area map for Myra, Myra, TXReach our Myra line directly and get a technician on the way today.
Call +1-844-578-1604